M2 is a GPS mode head up display for car. Unlike most of the head up displays on the market, our designers have taken full advantage of the windshield’s characteristics to design a simple white windshield HUD.
Product Features

HUD projection display: oversized font display speed, HD experience, metal nanotechnology on the front side to eliminate unwanted reflections and make the screen display clearer.
Automatic photosensitivity

Automatic light sensor: 1. Full automatic light sensing, adaptive adjustment brightness,clear enough during the day, not dazzling at night. 2. Comes with hood,Integrated design, Cover the lights of the display panelno dazzling when driving at night
Product Placement

Product Placement: Small compact bodysuitable for placement, Suitable for placing any corner, not affecting the driver’s sight
Plug and Play + Installation Steps

GPS+BeiDou dual-mode chip,fast refresh speed,no delay,USB power supply 0 power consumption Plug and Play (1.Plug the USB cable into the cigarette lighter connector 2.Plug the wires into the A-pillar seal 3.Connect the end of the USB connector to the HUD, and place the HUD in the right position).
Universal Model

M2-HUD for all models: inherent compatibility USB (5V) usable, non-destructive installation, plug and play
Product Accessories

Product accessories:1.M2-head-up display 2.Type-c USB cable 3.Reflective film 4.English manual 5.3M Sticker
It has a about a second or two delay compared to the digital displays in modern cars, but not really too big of a problem if you are maintaining speed. If I am driving city and need to be at 35, it does it’s job well enough.Sadly, you cannot see this when wearing sunglasses. The numbers just vanish from the windshield. It’s fine without sunglasses though, and looks great at night.Clean your dash as best as possible. The sticky pad will connect dirt and not stick any more. If this happens, wash it under the sink and let it fully dry.It comes with a USB cable and an ODB2 cable, so you can power it with either or.
After turn it it¡¯s not doing supposed to do ! It¡¯s very hard to set it up ! Not very happy about the stuff, keep forcing and fizzling screen !!
nice
Works but is very inaccurate. Connected to the OBDII port it should display the exact same speed as the vehicle speedometer, but the faster you are traveling the more inaccurate it becomes. At 55mph it displays 72mph. At highway speed of 65 it displays 87 mph. What’s the problem with the programming in this device?
I have this set towards the center of my dashboard so that when I check my rearview mirror I can see my speed without having to look down to the instrument cluster.